NOTE: This scale is sold by others companies with a quick
connect feature. We know from past experience that this quick connect feature
is NOT watertight and any moisture will cause errors in weight readings. We
customize our system so that wires are located in a watertight housing (wiring
box). This will prevent MAJOR system failures due to water!
This 60.000 lbs capacity truck axle scale system is an ideal scale to check truck weights for reference (non legal for trade applications). This set consists of two scale platforms 7 feet long and 4 ramps. It weighs the truck by axle or axle groups. The total weight will be summed up by the individual weighments.
Rugged: Constructed of structural steel 8" channel iron
and a 1/4" deck plate. No moving parts to wear out. 150% overload
capacity. 100% end load capacity. Diamond plated non-slip steel.
Highest Quality: Uses environmentally sealed electronic
shear beam load cells and a S.S. NEMA 4x junction box. Totally sealed for
outdoor environments and backed by a 1 year manufacture warranty.
This Axle Scale provides the ability to accurately weigh vehicle
axles. These truck scales have a digital indicator that has an accumulation
feature that totals the axle weights on the screen. These systems are built to
offer a cost effective solution to a full length truck scale.
Non-NTEP (Not legal for
trade).
Simple set-up. Place the scale on any flat hard surface:
grass, asphalt, concrete, dirt, cement, wooden planks, compact ground, gravel,
or any hard flat conditions.
SCALE FEATURES:
- 60,000 lbs x 10 lbs Capacity
- Quick Easy Setup
- Heavy duty design
- High Accuracy
- Two scale platforms (Total 60,000 lb per axle) + four ramps
set
- Battery powered Indicator optional
- Platform Size: 84" (L) x 30" (W) x 5.75" (H) (each scale)
- Ramp Length: 24"
- Large envelop shear beam load cells
- Stainless steel junction box
- 20' cable from each platform
- Adjustable swivel steel feet
- Calibrated to 60,000 lbs by 10 lb increments
- Forklift portable
- Designed and Engineered for Vehicle Axle Weighing
- Accumulation Mode Totalizes Weights of All Axle
- All Components are Watertight for Outdoor Environment
- Heavy Duty Steel I-Beam Construction
- Treaded Top Plate
- On/Off Ramps Include Bolting Tabs For Fixed Installations
- Factory Calibrated
- Two-year limited warranty on platforms. One year limited warranty on electronics.
STANDARD INDICATOR:
- Easy to read LCD Display in bright sun
- 25 Feet of cable between the wiring box and indicator
- Easy Operation
- LB / KG Conversion
- TARE (weight on scale via TARE key)
- Standard 110v power
- Optional 9V power. Uses 1 or 2 batteries. Please indicate at checkout
- Tilt Adjustable Wall or Desk Mount
- Proudly made in the USA
- 1 year warranty
RM-6 REMOTE DISPLAY:
RM-6 remote display is a versatile outdoor remote display for all types of weighing environments. The Ultra-bright LED display is all solid-state and has no parts to repair or replace. The lights are of the same type that are used in automotive and traffic signal applications. The RM-6 has large 6 inch tall digits that can be seen in bright sun at a distances over 200 feet.
- NEMA 4X non-metallic enclosure for harsh environments.
- Automatic learn for quick setup.
- Connect via terminal block
- RS232 - 20ma & optional RS485
- High brightness LED can be seen in direct sunlight at distances up to 200 feet.
- Long life - NO moving parts.
- 6 INCH 200 foot visibility
- 120 volt operation
- Low Cost
- No Maintenance
- SPECIFICATIONS:
- Power .............................120vac +- 10% 120 watts typical 220vac optional
- Enclosure ........................NEMA 4X watertight and corrosion proof polycarbonate
- Size: 23” x 12” x 5”
- Comes with screw on mounting ears for wall or pole mounting.
- 1 year warranty. Made in the USA
Options: - Receipt printer
- Ticket printer
- In/Out Truck Memory ID
We also carry a complete weighing system that is automatic and operator free. Click here *Scale color may vary from picture.
|